I bought my MBP back in September of 2012, and it’s been the best machine I’ve ever owned. Named Apotheosis, it’s quiet, powerful, good battery life, and all that. It’s been through four or five iterations of MacOS, and still runs fast. It’s got old-school USB 3 ports, an SD card reader, and the mag-safe connector. In short, the only thing I could hope to improve it would be more storage.
Of late, however, it’s been exhibiting power issues. It will log itself out, or spontaneously go to sleep and not wake up without external power. I reset the System Management Controller (SMC) by the arcane ritual of holding down Shift, Control, and Option on the left side of the keyboard, then holding down the power button for 10 seconds. No luck.
Then, there’s some minor issues with the screen; small areas that look almost like fungus in the display. From what I’ve read, this has affected a lot of older Retina displays, but in my case it’s more an annoyance than a serious problem. Still, given these two issues, I thought perhaps it’s time to upgrade. After all, the machine’s over six years old.
Looking at the new MacBooks and MacBook Pros, though, I can’t find anything that would be satisfactory. Certainly nothing at a price-point that I feel like paying. I’m not a big fan of the new keyboards, and if you want to put a lot of storage (i.e., 2TB) in a machine, Apple really makes you pay. Resolved, then, try to get more years out of Apotheosis. Apple no longer services this model, and the indy/Authorized dealers wanted $500 to replace the battery. That seemed high to me.
Other World Computing has a replacement battery kit for $85. I ordered it, and it arrived overnight! In big red letters, they warn that “Professional Installation Highly Recommended” but people like me don’t pay any attention to such things.
The kit comes complete with Torx screwdrivers specifically for the MBP, including the (in)famous “pentalobe” driver.
They also supply a step-by-step video for the process. This is a really outstanding instructional video. It shows everything in perfect detail. Things which sound simple in words (e.g., “unclip the connector”) are often not so clear when staring at the physical object. But watching each step makes it very simple.
That being said, they estimated two hours to do the process, and it took me more like three. Part of that was my obsessive disassembly process which I’ve perfected over the years. It involves lots of post-it notes, with little drawings and sticky tape that I use to make sure I can reassemble things correctly. In this case, the video would have been sufficient, but old habits die hard. And, frankly, this is a good habit.
Even thought OWC makes this a straightforward process, Apple certainly didn’t intend it to be. You have to remove the speakers to really get at the battery. To get the speakers out, you basically have to remove all the guts:
The kit includes a gnarly solvent that helps dissove the adhesive holding the battery in place. This is the worst part of the process, although they provide gloves and eye protection to make it a safer process.
Once the machine was back together, I went through a full charge/discharge cycle, and it’s seemed quite stable. There are some weird minor discrepancies. For example, while writing this post and doing some other odd chores, I’ve been unplugged. The menu bar battery gauge tells me I’m at 81%, while CoconutBattery tells me I’m at 77.6%.
With any luck, this repair will help me keep Apotheosis up and running for a few more years!